Product Description
Product introduction:
This series of products is a vertically clamped fuselage with an integral frame structure. The horizontal fuselage and the vertical fuselage are pre tensioned by pull rods to form a whole; With high rigidity and strength, the slider is guided by four corner plane guide rails, with high adjustment accuracy, good stability and strong anti eccentric load capacity.
Areas of adaptation:
This equipment is mainly used in the die forging process of the front left and right brake cam blanks of automobiles; It is also applicable to the local die forging process of the end and middle of long bar and long tube.
Performance characteristics:
This series of products adopts the finite element stress analysis and optimization design. The structural parts are welded by the German Kruse welding robot. After welding, heat treatment is carried out according to the standard to eliminate the welding internal stress. Five axis gantry machining center is used for processing. The equipment has good accuracy retention, long service life and mold protection.
Other functions and auxiliary devices are optional:
Mobile security radar scanner.
project | 单位 | YPM-PD-200/400 | YPM-PD-400/800 | YPM-PD-500/1130 | YPM-PD-800/1800 |
tonnage | KN | 4000 | 8000 | 11300 | 18000 |
Vertical Slider | Nominal force | KN | 2000 | 4000 | 6300 | 10000 |
Return force | KN | 240 | 500 | 6400 | 540 |
Slide stroke | mm | 200 | 400 | 400 | 600 |
Slider speed | Get off quickly | mm/s | 200 | 200 | 200 | 200 |
work | mm/s | 45～18 | 45～18 | 30～12 | 18～7 |
return trip | mm/s | 160 | 180 | 220 | 170 |
Vertical Slider | Nominal force | KN | 2000 | 4000 | 5000 | 800 |
Return force | KN | 400 | 300 | 500 | 640 |
Slide stroke | mm | 600 | 600 | 600 | 800 |
Slider speed | Get off quickly | mm/s | 230 | 230 | 230 | 230 |
work | mm/s | 45～18 | 45～18 | 37～15 | 37～15 |
return trip | mm/s | 220 | 220 | 180 | 220 |
Distance between slider end face and fuselage center | mm | 1200 | 1400 | 1600 | 1600 |
